Knowledge Management System Of Guangzhou Institute of Energy Conversion, CAS
多孔介质中甲烷水合物的生成特性的实验研究 | |
张郁; 吴慧杰; 李小森; 李刚; 陈朝阳; 曾志勇 | |
2011 | |
Source Publication | 化学学报 |
ISSN | 0567-7351 |
Volume | 069Issue:019Pages:2221 |
Abstract | 在定容的条件下,实验研究了甲烷水合物在不同的多孔介质中的生成特性,所使用的多孔介质平均孔径为9.03,12.95,17.96与33.20 nm,其中孔径为12.95 nm的多孔介质使用了三个粒径范围,分别为0.105~0.150 mm,0.150~0.200 mm,0.300~0.450 mm;其他孔径的多孔介质的粒径范围为0.105~0.150 mm.实验的温度范围为274.15~278.15 K,初始生成压力范围为7.4~11.0 MPa.实验表明,水合物的生成速度随着初始生成压力的升高与水浴温度的降低而增大,随着多孔介质粒径的增大与孔径的减小而降低. |
Language | 英语 |
Document Type | 期刊论文 |
Identifier | http://ir.giec.ac.cn/handle/344007/21935 |
Collection | 中国科学院广州能源研究所 |
Affiliation | 中国科学院广州能源研究所 |
First Author Affilication | GuangZhou Institute of Energy Conversion,Chinese Academy of Sciences |
Recommended Citation GB/T 7714 | 张郁,吴慧杰,李小森,等. 多孔介质中甲烷水合物的生成特性的实验研究[J]. 化学学报,2011,069(019):2221. |
APA | 张郁,吴慧杰,李小森,李刚,陈朝阳,&曾志勇.(2011).多孔介质中甲烷水合物的生成特性的实验研究.化学学报,069(019),2221. |
MLA | 张郁,et al."多孔介质中甲烷水合物的生成特性的实验研究".化学学报 069.019(2011):2221. |
Files in This Item: | There are no files associated with this item. |
Items in the repository are protected by copyright, with all rights reserved, unless otherwise indicated.
Edit Comment