Knowledge Management System Of Guangzhou Institute of Energy Conversion, CAS
Hydrogen production by steam reforming of dimethyl ether and CO-PrOx in a metal foam micro-reactor | |
Yan, Changfeng1,2![]() ![]() ![]() | |
2014-07-03 | |
Source Publication | INTERNATIONAL JOURNAL OF HYDROGEN ENERGY
![]() |
Volume | 39Issue:20Pages:10409-10416 |
Abstract | A bi-function catalyst containing CuZnAlCr and HZSM-5 was used to generate hydrogen by stream reforming of dimethyl ether (SRD) in a metal foam micro-reactor and a fix-bed reactor. Dimethyl ether conversion of 99% and hydrogen yield of >95% was reached with HZSM-5/CuZnAlCr (mass ratio of 1:1) in the micro-reactor. A suitable balance between the dimethyl ether hydrolysis and methanol reforming steps requires the proper acidity and the metal sites. The CuZnAlCr/HZSM-5 properties, effect of CuZnAlCr to HZSM-5 mass ratio were investigated in the metal foam micro-reactor. Moreover, CO was removed from hydrogen-rich gas by preferential oxidation reaction (CO-PrOx) with PtFe/gamma-Al2O3 catalyst in a similar metal foam micro-reactor follows the SRD stage. With the optimized O-2/CO ratio and reaction temperature, the CO concentration dropped to <10 ppm and hydrogen yield of similar to 90% were achieved in the new-type SRD-COPrOx system. The SRD-COPrOx system provide a constant hydrogen production with CO concentration lower than 10 ppm during 20 h. The results indicate that metal foam micro-reactor has the great potential in the DME steam reforming to supply hydrogen for low-temperature fuel cells. Copyright (C) 2014, Hydrogen Energy Publications, LLC. Published by Elsevier Ltd. All rights reserved. |
Subtype | Article |
Keyword | Metal Foam Hydrogen Production Dme Steam Reforming Micro-reactor |
WOS Headings | Science & Technology ; Physical Sciences ; Technology |
DOI | 10.1016/j.ijhydene.2014.04.096 |
WOS Subject Extended | Chemistry ; Electrochemistry ; Energy & Fuels |
WOS Keyword | FUEL-CELLS ; MICROCHANNEL REACTOR ; COMPOSITE CATALYSTS ; NICKEL-CATALYSTS ; CARBON FORMATION ; FLUIDIZED-BED ; NOBLE-METAL ; METHANOL ; OXIDATION ; ETHANOL |
Indexed By | SCI |
Language | 英语 |
WOS Subject | Chemistry, Physical ; Electrochemistry ; Energy & Fuels |
WOS ID | WOS:000338388200009 |
Citation statistics | |
Document Type | 期刊论文 |
Identifier | http://ir.giec.ac.cn/handle/344007/10690 |
Collection | 中国科学院广州能源研究所 |
Affiliation | 1.Chinese Acad Sci, Guangzhou Inst Energy Convers, Guangzhou 510640, Guangdong, Peoples R China 2.Univ Chinese Acad Sci, Beijing 100049, Peoples R China |
First Author Affilication | GuangZhou Institute of Energy Conversion,Chinese Academy of Sciences |
Recommended Citation GB/T 7714 | Yan, Changfeng,Hai, Hang,Guo, Changqing,et al. Hydrogen production by steam reforming of dimethyl ether and CO-PrOx in a metal foam micro-reactor[J]. INTERNATIONAL JOURNAL OF HYDROGEN ENERGY,2014,39(20):10409-10416. |
APA | Yan, Changfeng,Hai, Hang,Guo, Changqing,Li, Wenbo,Huang, Shilin,&Chen, Hao.(2014).Hydrogen production by steam reforming of dimethyl ether and CO-PrOx in a metal foam micro-reactor.INTERNATIONAL JOURNAL OF HYDROGEN ENERGY,39(20),10409-10416. |
MLA | Yan, Changfeng,et al."Hydrogen production by steam reforming of dimethyl ether and CO-PrOx in a metal foam micro-reactor".INTERNATIONAL JOURNAL OF HYDROGEN ENERGY 39.20(2014):10409-10416. |
Files in This Item: | There are no files associated with this item. |
Items in the repository are protected by copyright, with all rights reserved, unless otherwise indicated.
Edit Comment