Knowledge Management System Of Guangzhou Institute of Energy Conversion, CAS
Kinetic study of low-temperature conversion of plastic mixtures to value added products | |
Ding, Fei1,2,3; Xiong, Lian1,2; Luo, Cairong1,2; Zhang, Hairong1,2; Chen, Xinde1,2 | |
2012-03-01 | |
Source Publication | JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS |
Volume | 94Pages:83-90 |
Abstract | Batch-mode pyrolysis of 200.0 g samples of polymers was studied at low temperature. The cracking reaction was carried out in a stainless-steel autoclave with reaction temperatures of 360, 380,400 and 420 degrees C, initial pressure of 6.325 kPa (absolute pressure) and reaction times of 0-240 min. Based on the experimental results, a four-lump kinetic model has been developed to describe the production distribution of the light fractions, middle distillates and heavy fraction. This model reasonably fitted the results in each reaction of operation conditions. It was also found that the pyrolysis kinetics of separated plastic, mixed plastic and mixed plastic containing additives can be described by the same kinetic model. The plastic additives have not had a great influence on the product distribution and kinetics of the mixed plastic pyrolysis. Finally, the optimum conditions of low-temperature conversion of plastic mixtures to value-added products were established. The formation of heavy fractions from HDPE was as high as 70 wt% at 380 degrees C at a reaction time of 250 min. During the thermal degradation of plastic mixtures, the heavy fractions yielded up 50 wt% for 30 min reaction time at 400 degrees C. The total activation energies for the conversion of HOPE and the plastic mixtures were estimated to be 217.66 kJ mol(-1) and 178.49 kJ mol(-1), respectively. (C) 2011 Elsevier B.V. All rights reserved. |
Subtype | Article |
Keyword | Plastic Mixtures Additives Low-temperature Pyrolysis Kinetics Lumping Batch Reactor |
WOS Headings | Science & Technology ; Physical Sciences ; Technology |
DOI | 10.1016/j.jaap.2011.11.013 |
WOS Subject Extended | Chemistry ; Spectroscopy |
WOS Keyword | GASOLINE-RANGE HYDROCARBONS ; HIGH-DENSITY POLYETHYLENE ; SPOUTED BED REACTOR ; WASTE PLASTICS ; THERMAL-DEGRADATION ; PYROLYSIS KINETICS ; CRACKING ; POLYPROPYLENE ; POLYSTYRENE ; RECOVERY |
Indexed By | SCI |
Language | 英语 |
WOS Subject | Chemistry, Analytical ; Spectroscopy |
WOS ID | WOS:000303088200011 |
Citation statistics | |
Document Type | 期刊论文 |
Identifier | http://ir.giec.ac.cn/handle/344007/10580 |
Collection | 中国科学院广州能源研究所 集成技术研发中心 |
Affiliation | 1.Chinese Acad Sci, Key Lab Renewable Energy & Gas Hydrate, Guangzhou 510640, Peoples R China 2.Chinese Acad Sci, GuangZhou Inst Energy Convers, Guangzhou 510640, Peoples R China 3.Chinese Acad Sci, Grad Univ, Beijing 100049, Peoples R China |
First Author Affilication | GuangZhou Institute of Energy Conversion,Chinese Academy of Sciences |
Recommended Citation GB/T 7714 | Ding, Fei,Xiong, Lian,Luo, Cairong,et al. Kinetic study of low-temperature conversion of plastic mixtures to value added products[J]. JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS,2012,94:83-90. |
APA | Ding, Fei,Xiong, Lian,Luo, Cairong,Zhang, Hairong,&Chen, Xinde.(2012).Kinetic study of low-temperature conversion of plastic mixtures to value added products.JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS,94,83-90. |
MLA | Ding, Fei,et al."Kinetic study of low-temperature conversion of plastic mixtures to value added products".JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS 94(2012):83-90. |
Files in This Item: | There are no files associated with this item. |
Items in the repository are protected by copyright, with all rights reserved, unless otherwise indicated.
Edit Comment